| project |
Specification parameter |
| Main processor |
SOC |
Junzheng T31 |
| DDR |
64M Bytes |
| Image sensor |
sensor |
1/2.9 color CMOS sensor |
| IR-CUT |
Color black and white switcher |
| camera lens |
M12 f3.7MM F.2.0 2OOW |
| visible angle |
H (horizontal) 89 degrees; V 52 degrees vertically: D 108 degrees diagonally |
| minimum illumination |
0.01Lux |
| audio frequency |
Input / output |
Can realize two-way voice intercom (built-in microphone and speaker) |
| Audio compression mode |
G711A |
| video clip |
Video compression mode |
H.264 |
| Illumination frequency |
50Hz |
| Image frame rate |
20ps |
| Maximum image resolution |
1920*1080P |
| Night vision light source |
14mil infrared lamp (940nM wavelength), irradiation distance: 6m |
| network |
wireless network |
2.4G Wi-Fi(IEEE802.11b/g/n) with built-in antenna |
| Support agreement |
TCP/IP,UDP/IP,DHCP |
| IP address supported |
Wireless wifi support, dynamic IP address |
| AI |
Human body detection |
Support human body detection (4-5m), intelligent push, remote wake-up. |
| type of alarm |
Alarm notification |
Mobile APP message push |
| wake up |
Awakening mode |
PIR human body induction wake-up and remote active wake-up |
| videotape |
Video recording mode |
Alarm triggering, manual video recording and all-day video recording. |
| Video recording |
Local Micro SD card, mobile phone memory |
| Indicator light |
LED indication |
RGB light, power supply/point-to-point mode/remote mode |
| battery |
capacity |
3000mah |
| Disassembly |
The arm and the base are detachable. |
| Use time |
2 months (depending on the wake-up situation) |
| standby time |
1 year |
| charging voltage |
DV 5V+-5%/2A |
| Charging time |
Within 6 hours |
| Protection mode |
Over-current/over-discharge/over-charge/short circuit/high and low temperature charging protection |
| power consumption |
Standby power consumption |
(3.7V 0.18mA) |
| Daytime working power consumption |
(3.7V 230mA) |
| Working power consumption at night |
(3.7V 400mA) |
| port |
Power Supply |
Type-C interface |
| Sd card |
1 Micro SD card (up to 128GB) |
| button |
1 reset button, 1 on/off button |
| By way of loading |
By way of loading |
flatwise |
| environment |
Waterproof |
Not waterproof |
| Working environment |
--10° ~ 45°C /0% ~ 80%% (no condensation) |
| Storage environment |
--20°C ~ 60° /0% ~ 90%% (no condensation) |
| specifications |
Size (LxWxH) |
Body: 18cm (height) x 15cm (length) x 9cm (width) Base size: φ 8.5cm. |
| Bare metal net weight |
About 403g |
| Finished product weight |
About 660g |
| Material+technology |
ABS |
| colour |
Black and white/black grey |